•   Voorwaarden  
  •   Beleid  
  •   Gastenboek  
  •   Contact Us  
  •   nieuws  
  •   Producten  
  •   Over ons  
  •   Home  

  • Over ons

    Onze cultuur

    Product show

    Toon Factory

    Sales markt

    nieuws

    our news

    Diesel engine works

    The working process of diesel engines with gasoline engines as a matter of fact, each work cycle has gone through the intake, compression, for power, four stroke exhaust. Diesel engines with compression point
    Fire, using high temperature air ignited diesel fuel, produce power.

    Intake stroke
    Exhaust valve closing and intake valve open. When the piston down the row from the TDC, only in the intake manifold of the air sucked through the intake valve cylinder, the time and no fuel
    Into the cylinder.
    Compression stroke
    After the intake stroke, and when the piston from BDC started rising, the intake valve is closed and stop into the air. Increase in piston pressure and temperature, while it began to increase
    . In diesel engines, compressed air must be heated until it reaches the ignition temperature of above.
    Acting trip
    When approaching the end of compression stroke, the fuel nozzle means to spray emitted by the heated compressed air is being atomized fuel will ignite. In this result, the cylinder
    The pressure will increase rapidly and push the piston down, this thrust into the power to turn the crankshaft production.
    Exhaust stroke
    After the end of the combustion process, and when the piston just down the road close to the next point, the exhaust valve will open. When the piston up again And when will exhaust through the exhaust valve, exhaust manifold
    And the exhaust muffler exhaust.
    However, diesel engines, diesel fuel, the viscosity ratio of gasoline, which is difficult evaporation, and its spontaneous combustion temperature is lower than gasoline, so the formation of flammable mixture and the ignition with
    Gasoline different.
    £  £  ordinary diesel engine camshaft driven by the aid of high-pressure pump diesel fuel delivered to each cylinder chamber. This approach to oil changes with engine speed changes
    Technology, can not do the best under all speed oil supply. It is now more widely used in electronic control common rail diesel injection systems can be better solved the problem.
    £  £  jet common rail fuel injection system from the high-pressure pump, the public for the tubing, injector, electronic control unit (ECU) and a number of pipeline pressure sensors, the system in each spray
    Oil cooler through their high-pressure tubing and tubing connected to the public for the public for the tubing to the injector to play the role of hydraulic accumulators. Work, high pressure oil pump to high pressure of fuel delivery to the public
    Total for the pipeline, high pressure pumps, pressure sensors and ECU closed loop composed of the work of the public for the hydraulic tubing to achieve precise control, completely changed with the engine oil pressure switch
    The phenomenon of rapid change. The main features of the following three areas:
    £  £  1, the fuel injection timing and metering completely separated, the process of injection pressure and injection time control by the ECU.
    £  £  2, can be adjusted according to the working conditions of the engine cylinder injection pressure, start of injection, duration, and thus the pursuit of the optimal control point fuel injection.
    £  £  3, to achieve a high injection pressure, and to achieve pre-injection diesel.
    £  £  compared to gasoline engines, diesel engines with low fuel consumption (average 30% lower than gasoline) and diesel prices low, so fuel economy is better; while diesel
    Speed generally much lower than gasoline engines, torque than gasoline, but its quality and large, noisy work, manufacturing and maintenance costs high, and worse emissions than gasoline. But
    With modern technology, diesel engine, these drawbacks are gradually being overcome, not the high-level cars now have started using diesel engines was.

     



    China Lutong diesel Parts Plant is een fabrikant gespecialiseerd in dieselmotor parts.Our majored producten is Ve Pump, diesel injectie delen, diesel nozzle, diesel injectie-systeem, en de onderling samenhangende producten (zoals Hoofd Rotor, Brandstofpomp, Cam Plate, Drive Shaft, Manget Klep, enz.), Diesel zuiger (A, AS, P, PS7100, P8500, magnetron type, enz.), Diesel sproeikop (DN, DNOPDN, S, SN, PN, enzovoort.), Slangkraan, Cat Potlood sproeikoppen en ga zo maar door.
    Copyright by China lutong pompa iniezione diesel All Right Reserved